|
resi-linx
"linx-IR" Intra Red over UTP
Cable
|
| 
|
RL-IR100
|
|
|
|
- HW IR Repeater Kit
- Includes: Flat Target
- Junction Box
|
- Double Emitter
- Switch Mode P/S
- NOW FOXTEL APPROVED
|
Description:
The resi-linx ® RL-IR100 is a Plasma Friendly Hard Wired Infra-Red repeater kit
for use in DIY &/or custom installations, to control an A/V device at a
remote location (up to 1.8m). All connections are plug & play, and the kit
includes discrete Flat IR target, junction box, double emitter & switch mode
power supply.
The RL-IR100 Junction Box features built in LED to show
acknowledgement of IR commands, and is compact and lightweight. |
|
|
|
|
|
|
|
|
RL-IR170
|
|
|
|
- IR Distribution Hub
- IDC Terminations: 8
|
- RJ45 sockets: 8
- Data performance: Cat 5e
|
Description:
Cat 5e IR Distribution Hub that allows for simple IR distribution to up to 7
Targets in a star-wired configuration. Shallow mount metal
casing. Accommodates up to 8 individually terminated lines via RJ45 sockets
or IDC terminations. |
|
|
|
|
|
|
|
|
RL-IR305
|
|
|
|
- Dist. Module with Discrete IR
- Emitter Output Ports: 7
- (4 Common, 2 Discrete & 1 Direct)
|
- Target Input Terminals: 1
- RJ45 Sockets: 1
|
Description:
Compact Distribution Module for use in resi-linx® NEW 'linx-IR' patented
Discrete Infra Red system, with RL-IR505 (Receiver Module and Flat
Target). Advantage of Discrete IR control of specific AV devices from each
zone, ideal where two of the same AV devices are installed in the one
area. Ability to distribute to multiple zones with loop wiring configuration
using RL-IR505, or star wiring via RL-IR170 IR Distribution Hub. Built-in
LED's to show acknowledgement of IR commands and Power status. Includes switch
mode power supply and Direct IR lead. |
|
|
|
|
|
|
|
|
RL-IR505
|
|
|
|
- Receiver Module & Target
- Emitter Output Ports: 2
|
- Target Input Terminals: 1
- RJ45 Sockets: 2
|
Description:
Receiver Module for use in resi-linx® NEW 'linx-IR' patented Discrete Infra Red
system. Advantage of Discrete IR control of specific AV devices from each
zone via Dip Switch selection. Easily extendable cable distance by 'Plug and
Play' facility using RJ45. Built-in LED's to show acknowledgement of IR commands
and Power status. Powered remotely by Distribution Module |
|
|
|
|
|
|
|
|
RL-IR600
|
| 
|
|
- Receiver: IR Tube Target
- Cable Length Max: 60 m
|
|
Description:
The resi-linx ® RL-IR600 is a Tube IR Target used in the IR Distribution System.
When combined with other products in the IR Distribution System it will allow
you to send IR Signals to control electronic devices from remote
locations.
Mounted in a wall plate, in the ceiling or in a cabinet, the
RL-IR600 is compact and will allow you to control your AV equipment while
discreetly tucked away inside the cupboard or in a different location |
|
|
|
|
|
|
|
|
RL-IR700
|
| 
|
|
|
Description:
The resi-linx ® RL-IR700 is a single head blaster-type IR emitter that repeats
IR remote control signals received at an IR target and sent back through the
cable to the AV equipment. Compatible with RF IR pass back systems (5V) and
Hard Wired IR systems (12V)
|
|
|
|
|
|
|
|
|
RL-IR800
|
| 
|
|
|
Description:
The resi-linx ® RL-IR800 is a double head blaster-type IR emitter that repeats
IR remote control signals received at an IR target and sent back through the
cable to the AV equipment.
Compatible with RF IR pass back systems (5V) and
Hard Wired IR systems (12V) |
|
|
|
|
|
|
