|
resi-linx
"linx-AV" Component Video Solutions over UTP
Cable
|
| 
|
RL-BV100
|
| 
|
|
- Composite Video Balun (pair) with Stereo Audio
|
- Remote Power Option
- 3 x RCA, 1 x RJ45
|
Description:
The A/V Adapters are used in pairs to send/receive video and audio signals (with
a remote power option) down UTP cable. The remote power is used when a security
camera is installed in a location without a power source (eg front gate). |
|
|
|
|
|
|
|
RL-BV1000
|
| 4
x 8 MATRIX
COMPOSITE
|
|
- 4 x 8 Composite AV Matrix Switch
- 4 x 3.5mm Audio
|
|
Description:
Composite video and stereo audio 4 x 8 Matrix Switch with IR control.
Allows
the transmission of 4 x composite baseband video signals and stereo audio
signals to up to 8 TV's using 4 pair twisted cable.
Discrete IR capable.
Includes Switch Mode power supply. |
|
|
|
|
|
|
|
|
RL-BV140A
|
| 1
x 4 SPLITTER
|
|
- 1x4 Composite AV Balun Transmitter
- IR Capable
|
- AV Loop Through
- All on one UTP
|
Description:
Composite video and stereo audio balun transmitter with IR control.
Allows
the transmission of composite baseband video signals and stereo audio signals to
up to 4 TV's using 4 pair twisted cable. |
|
|
|
|
|
|
|
|
RL-BV150B
|
| 
|
|
- Composite AV Balun Receiver
- Compact design
|
|
Description:
Composite video and stereo audio balun receiver.
Built-in IR control with the
addition of RL-BV500 Target. |
|
|
|
|
|
|
|
resi-linx
"linx-AV" Component Video Solutions over UTP
Cable
|
|
|
RL-BV200
|
| 
|
|
- Component Video and Digital Audio balun set
- 1 x RCA Audio
|
|
Description:
Component Video Balun set with Digital Audio Input. Allows the transmission of
component video and digital audio signals via a 4 pair twisted cable. |
|
|
|
|
|
|
|
|
RL-BV2000
|
| 4
x 8 MATRIX
COMPONENT
|
|
- 4 x 8 Component Video/Audio Matrix
Switch
- 3 x RCA (4 sets)
|
- 4 x 3.5mm Analogue Audio
- RS232 controllable
- 8 x RJ45 (2 sets)
|
Description:
Component video and audio 4 x 8 Matrix Switch with IR control.
Allows the
transmission of 4 x component video and audio signals to up to 8 TV's using two
4 pair twisted cables. Change Component Source within each zone. Supports
resolutions of 1080p/ 1080i/ 720p/ 576p/ 576i. Discrete IR capable. Full
control through RS232 commands. Includes Switch Mode power supply, and remote
control. |
|
|
|
|
|
|
|
|
RL-BV240A
|
| 1
x 4 SPLITTER
|
|
- 1x4 Component Video/Audio Balun Transmitter
- AV Loop Through
|
- IR Capable
- On two UTP cables
|
Description:
Component video and digital/analogue audio balun transmitter with IR
control.
Allows the transmission of component video and digital/analogue
audio signals to up to 4 TV's using 4 pair twisted cable. |
|
|
|
|
|
|
|
|
RL-BV250B
|
| 
|
|
- Component Video/Audio Balun Receiver
- Compact Design
|
|
Description:
Component video and digital/analogue audio balun receiver.Built-in IR
control with the addition of RL-BV500 Target. |
|
|
|
|
|
|
|
resi-linx
"linx-AV" PLASMA & LCD FLAT Receiver Targets
|
|
|
RL-BV500
|
| 
|
|
- Receiver: Flat IR Target
- Display: LED recognition
|
- LCD/Plasma friendly
- Foxtel/iQ compatible
|
Description:
New flat IR Target for resi-linx® 'linx-AV' range.
Receives IR commands from
remote controls and sends the signals through the system to control the AV
device at a remote location. Powered remotely by system. |
|
|
|
|
|
|
|
|
RL-ACC150
|
| 
|
|
|
Description:
IR Target Mount for use with RL-IR505 and RL-RF210 targets. |
|
|
|
|
|
|
|
|
RL-ACC160
|
| 
|
|
|
Description:
IR Emitter Shield for use with RL-IR700/800 emitters. Accurately projects signal
when used in Discrete IR installations. |
|
|
|
|
|
|
