control actuators and position your antenna, all from ONE BOX...

 Product Code: R-TF5000CiP

Free to Air, Dual CI, Built In Positioner

Accessories & Uses
 

SELECTV PAY-TV for less

Pay TV Subscription

Pay TV for Less

 

CI-Modules

IRDETO CI Modules

 

Optus Aurora

Optus Aurora

 

DG240 DiSEqC Motor

DiSEqC H-H Motors

return to satellite receiver menu page

logo_topfield.jpg

  with ACTUATOR POSITIONER, DUAL CI and more...

 

R-TF5000CiP.jpg

R-TF5000CIP

Download Specs
(266KB)


TOPFIELD Free to Air and Conditional Access Satellite Receiver, with built in actuator positioner function to motorise your C Band System with only one unit.

   Features:

  • MPEG-2 digital & Fully DVB-S Compliant
  • 2 Common Interfaces
  • DiSEqC 1.0, 1.1, 1.2 and USALS(DiSEqC 1.3)
  • 5000 services (TV and Radio) programmable
  • Service switching time less than 1 second
  • Service list editing
  • Favorite service list editing
  • 30 favorite service groups support
  • Automatic and Manual PAL/NTSC selection
  • Multilingual audio support
  • Multilingual menu text support
  • 256 color On-Screen Display (OSD)
  • GMT and Time Offset support
  • Full Picture In Graphic (PIG) function
  • Electronic Program Guide (EPG) for on screen service information
  • Subtitle supported
  • Teletext supported by VBI insertion and software emulation
  • Parental lock facility by service and program event
  • Firmware and Data transfer from receiver to receiver
  • Exciting games embedded
  • S/PDIF for digital audio or Dolby AC-3 bitstream output
  • SCART and RCA A/V output
  • RF-modulator output
  • S-VIDEO output
  • YUV and S-VIDEO output in SCART connector
  • VCR Timer function
  • Built-in Positioner (High Power Azimuth Control, 36VDC, 3A)

 

   Specifications:

Tuner & Channel Decoder

Input/Loop through Connector

F-type, IEC 169-24, Female

Frequency Range

950 ¡­2150 MHz

Signal Level Input

-65 ¡­-25dBm

LNB Power & Polarization

Vertical : +13.5VDC
Horizontal: +18VDC
Current : Max. 500mA with Overload Protection

22KHz Tone

Frequency : 22¡¾1KHz
Amplitude : 0.65¡¾0.2V

Demodulation

QPSK

Input Symbol Rate

1~45 MS/s

Code Rate

1/2, 2/3, 3/4, 5/6 and 7/8

MPEG Transport Stream A/V Decoding
Transport Stream ISO/IEC 13818-1 MPEG-2 Transport stream Specification
Profile Level MPEG-2 MP@ML
Aspect Ratio 4:3, 16:9
Video Resolution 720¡¿576
Audio Decoding MPEG-1 Layer 1 & 2
Main System
Main Processor RISC CPU
A/V & Data In/Out
TV-Scart
Video S-VIDEO output
Audio L/R output
VCR-Scart Video CVBS output
Audio L/R output
Video CVBS/S-VIDEO/RGB/YUV input for bypass
Audio L/R input for bypass
S-Video Video S-VIDEO output
RCA A/V Video CVBS output
Audio L/R output
S/PDIF Digital audio or Dolby AC3 bitstream output
RS-232C 9 pin D-sub type
Transfer rate : max. 115.2Kbps
RF-Modulator
Connector 75¥Ø, IEC 169-2, Female/Male
Output Channel CH21 ~ 69 (PAL), CH14 ~ 83 (NTSC)
TV standard PAL G/I/K, NTSC-M
Conditional Access Interface
PCMCIA 2 slots
DVB Common Interface standard
Front Panel
Keys 5 Keys (CH-/+, VOL -/+, STANDBY)
LEDs TV/STB, REMOTE, STANDBY
4-digit 7-segment LEDs Service number or Time display
RCU
39 Keys
Power Supply
Input Voltage 95 ¡­250 VAC, 50/60Hz
Type SMPS
Power Consumption Running: Max. 230W, Standby: 10W
Positioner & Skew
Terminals M1, M2, PULSE, GND, +5V, SKEW
Positioner Power +36VDC, Max. 3A(During 5 minutes)
Sensor Type Reed Switch
Skew Output Power +5VDC, Max. 100mA
Protection Separate internal fuse
The input shall have lightning protection
Physical Specification
Size (W¡¿H¡¿D) 340 ¡¿ 60 ¡¿ 265mm
Weight (Net) 2.7 kg

 

ACT018.jpg   ACTDiSEqc.jpg

Bulit In Actuator Positioner

and DiSEqC Functions

 R-TF5000CiPpro_r.jpg

REAR VIEW

 

 

 HOMEREGISTERCOMPANY HISTORY | RRP LIST | TRADE LOGINSATELLITE CHARTS | CONTACT US